Monster A5 V21.3 Manual De Usuario página 20

EN
To configure the displays using the Project menu:
1. Attach your external display(s) to the appropriate
port, and turn it(them) on.
2. Press the + P (or Fn + F7) key combination.
3. Click on any one of the options from the menu to
select PC screen only, Duplicate, Extend or Second
screen only.
4. You can also click Connect to a wireless display
at the bottom of the Project screen and follow the
steps to connect to any wireless enabled display.
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn it(them) on.
2. Right-click the desktop and select Display settings from the menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 3 displays from the Multiple displays menu.
2 Connected Displays
Note that when 2 displays are connected. Displays may be configured in
Duplicate mode.
20
Figure 7 -
Display (Multiple displays)
Figure 6 - Project