Publicidad
Idiomas disponibles
Idiomas disponibles
Brief description
Switching on the machine is only possible when
pressing the switch–lock (for your safety).
On-/off switch
The planing depth can be infinitely varied by
means of the adjusting wheel.
Limited r.p.m. in neutral reduces operating
noise – the r.p.m. are reduced when the
machine is not under load.
(only applicable for HBE 800)
Integrated suction channel for connection to a
vacuum-cleaner.
Blade drive cover swings back automatically
when rabetting.
Hard metal cutters, old–fashioned plane blades
(for rough–planing with adze–marks), and plane
blades with grooves for splitting shavings (for
easier shavings discharge at greater planing
depths), can be fitted into the blade drive shaft.
The old–fashioned plane blades and the
grooved plane blades are available as
accessories.
The base of the plane is angled so that it can
be brought on to the material more accurately,
and is fitted with a V–shaped groove for
chamfering edges.
On-/off switch
ENGLISH
For safety reasons this power tool is fitted
with a switch lock and the On-/Off switch
cannot be locked in the "On" position.
Switching on:
Press switch lock (1) and then On-/off
switch (2).
Switching off:
Release On-/Off switch.
2
Protective swing cover swings
back automatically or can be
operated by hand using the lever.
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our products,
technical specifications are subject to alteration without prior notice.
H 500, H 750, HB 750, HBE 800
1
2
Publicidad
