EINHELL TC-LL 2 G Manual De Instrucciones Original página 17

2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cross-line laser
•
Mounting
•
Bag
•
Original operating instructions
•
Safety information
3. Proper use
The cross-line laser uses lasers to project lines
onto the wall and is therefore designed for ali-
gning objects such as tiles, windows, doors or
pictures.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_TC_LL_2_G_SPK9.indb 17 Anl_TC_LL_2_G_SPK9.indb 17
GB
4. Technical data
Power supply: .............. 2 x 1.5 V; type AA (LR06)
Self-leveling range: ....................................... ± 4°
Accuracy: ......................................... ± 0.5 mm/m
Work range: ................................................. 16 m
Wavelength of vertical laser: ........... 510-530 nm
Wavelength of horizontal laser: ....... 510-530 nm
Laser class: ....................................................... II
Output power: ........................................ < 1 mW
Weight: ...................................................... 0.2 kg
5. Before using the equipment
5.1 Inserting batteries (Fig. 2)
•
Turn off the equipment using the ON/OFF
switch (1)
•
Open the battery compartment cover (6) by
pressing the nib (a) down.
•
Insert the batteries (b), ensuring that you fit
them the right way round.
•
Close the battery compartment cover (6)
again, making sure that it locks securely
If the LED indicator fl ashes red continuously even
though the device is upright, this means that the
batteries are fl at. Replace them as described
above.
5.2 Using the universal clamp (Fig. 3/Item 8)
You can fasten the supplied universal clamp (8)
to a table, shelf or similar object by clamping it in
position. Clamping is performed with the help of
the fastening nut (11).
To fi t the equipment to the universal clamp, pro-
ceed as follows:
•
Place the equipment by the female thread (7)
on the base of the equipment onto the male
thread (10) of the universal clamp (8)
•
Screw the unit securely to the mounting.
•
Using the adjusting screw (9) and the ball
joints (a), you can tilt the equipment to the
angle you require
To disassemble, proceed in reverse order
- 17 -
09.01.2024 15:35:54 09.01.2024 15:35:54