7.2,
FIRST START.
· Load water as described in paragraph "Water load".
· Place the line switch (1) to "ON", it will light the lamp of
line (2) and starts the water heater, shown by the lighting
of the lamp (3).
· Lift the lever (4) and hold it up until of the group (5)
comes water, indicating that the boiler is full of water,
and then lower the lever(4).
· Turn off the machine by placing on "OFF" the main
switch (1).
7.3,
START.
· Place the line switch (1) to "ON", it will light the lamp of
line (2) and starts the water heater, shown by the lighting
of the lamp (3).
· Wait until the boiler reaches the water temperature
indicated by the turning off of the lamp (3) at this point
the machine is ready for use.
5
3
on
1
off
2
4
17