®
SYNC by 50 Portable Bluetooth
Speaker
Refer to this guide for button descriptions and
locations of other features mentioned throughout
the manual.
Button Locations & Descriptions
Controls:
Track Back
Play / Pause
Track Forward
Track forward
Talk
Volume Down
3D Sound
Ports and Switches:
Power Off / Power On / Pair
3.5mm Audio
Micro USB Charge Port
Getting Started
Powering On/Off:
To turn on: push power/pairing switch to center position. A tone will sound
indicating the power is on and LED light will begin to blink.
To turn off: push power/pairing switch to off position. LED light will stop
blinking.
Notice: The SYNC by 50 Portable Bluetooth Speaker has a rechargeable lithium-ion battery.
Please charge fully before first use.
Connecting Your Device:
1. Make sure your device is in Bluetooth discovery mode.
2. When power is on and LED light is on, push and hold the power/pairing
switch in the SYNC position for approximately 2 seconds. 3 LED lights will
begin to flash in rotation.
3. Release the power/pairing into the center position and choose 'SYNC
by 50' on your pairing device (New devices will connect automatically
– some older devices may require password '0000' to be entered).
4. Once connected, the next time the SYNC by 50 Portable Bluetooth
Speaker is turned on, it will automatically connect to your device.
®
SYNC by 50 Portable Bluetooth
Speaker