Descargar Imprimir esta página

SMS Audio SYNC by 50 Portable Bluetooth Speaker Manual Del Propietário página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

®
SYNC by 50 Portable Bluetooth
Speaker
Using 3D Sounds:
To enable 3D sound while listening to music, simply touch the 3D sound
button to select the next pre-set 3D sound effect.
1. Normal – playback of the original music source (two beeps indicate normal
mode is selected).
2. eXTX – delivers much wider and affluent surround sound images based on
the acoustic crosstalk cancellation technology.
3. Live – delivers a natural and soft 3D sound field effect simulating that of a
live performance.
4. Wide – provides a panoramic 3D audio image of widely spread main vocal
and center-placed instrumentals.
5. MEX – not only delivers wide stereo sound image, but also enhances low-
frequency sound to provide rich and deep bass tones.
*If Bluetooth codec is connected via aptX codec, change to SBC in order to use
3D sound effects.
Using aptX
:
®
If your device supports the aptX codec, the SYNC by 50 Portable Bluetooth
Speaker will automatically be active. You may also press and hold the 3D
sound button for 2-3 seconds to select 3D or aptX mode. Once 3D mode is
selected, you can cycle through 5 different pre-set sound effects.
*3D sound effects are not supported for aptX codec.
3d Sounds / aptX
®
LED Messages / Maintenance / Resetting
LED Light Messaging:
Power On
Blue, Green or Red SOLID LED
light depending on battery level.
Turning Off
Red LED dims and disappears.
Maintaining Your SYNC by 50 Bluetooth Speaker:
- Do not place the product near fire. The battery may heat up and explode.
- Do not drop or apply excessive force to the product as it may become damaged.
- When storing the product for an extended period of time, store it in a dry
place and avoid extreme temperatures.
- If the product gets wet, avoid exposure to heat or an electrical current.
- Always use a compatible USB/AC adapter to charge your SYNC by 50
Portable Bluetooth Speaker.
Resetting SYNC by 50 Portable Bluetooth Speaker:
If the SYNC by 50 Portable Bluetooth Speaker needs to be reset, hold the
power switch in the pairing position and touch the volume up button at the
same time.
SYNC by 50 Portable Bluetooth
Low Battery
Recharging Complete
SOLID Blue, Green or Red
All LEDs turn off.
light depending on battery level.
Pairing Mode
Recharging
Blue , Green and Red LEDs flash
One of Blue, Green or Red stays on.
in rotation.
®
Speaker

Publicidad

loading