Publicidad
Idiomas disponibles
Idiomas disponibles
Sleep mode: The airflow speed and noise level are reduced to the lowest
level.
Nature mode: The airflow speed alternates between 3, 4 and 5 in
succession.
If the fan is in "Nature" mode, pressing it again will cancel any mode setting. You
can also press the air speed button to exit the current mode.
3.
Timer
A timer can be set to switch the fan OFF automatically. The timer can be set in
1-hour intervals up to 8 hours: 0→1→2...→8. You can adjust the timer setting
by pressing the timer button repeatedly. The current timer setting is displayed.
Each press increases the timer by 1 hour; if the timer setting is 8 hours,
pressing once resets the setting to 0.
When the fan is OFF, the timer setting is cancelled.
4.
Swivel function
Press this button to set the horizontal swing angle. There are four angle
options that are changed with each press: 30°, 60°, 90°, 120°. The current
swivel angle is displayed. A fifth press stops the swivel movement.
5.
Air speed
Press this button to switch between 9 air speed levels from 1 to 9.
Press and hold this button for 2 seconds to enter strong mode where the air
speed remains set at the highest level.
Using the remote control
1.
After taking the remote control out of the packaging, remove the battery
cover and insert 2 AAA batteries to use it directly.
2.
When using the remote control, the transmitter of the front part of the
remote control must be aligned with the reception window of the product.
Note: The reception window is located on the front of the
Housing, above the button
163
Publicidad
