Be Cool BCBLWiFi01 Instrucciones De Uso página 162

Please observe the following instructions for the safe operation of the fan:
•
Make sure that the fan is placed on a flat and stable surface. Placing
it on an inclined surface may cause damage.
•
Never block the air inlet or outlet of the fan as this may affect
performance.
•
Make sure that there are no obstacles within a distance of 30 cm in
front of the air outlet so as not to obstruct the air circulation.
You can adjust the direction of the airflow to your liking by
gently pushing the upper part of the fan's air outlet ring
forwards or backwards. This allows the air to be directed
either upwards or downwards.
Plug the fan into a power outlet and check that the
voltage on the rating plate matches the voltage in your
home. When the fan is properly connected, a single beep
will sound and it will be in standby mode.
1. Switch on / off
When the fan is in standby mode, press the on / off button to switch the fan on
in normal mode at the preset fan speed. When the fan is in operation, press
the On / Off button again to switch it off.
2. Air mode
Press the air mode button to switch between four airflow modes. The indicator
for the current mode lights up.
Automatic mode: The fan automatically adjusts the airflow speed
according to the PM2.5 level detected in real time.
PM2.5 value
Airflow velocity
Display colour
Strong mode: The airflow speed is set to the highest level.
0 - 35 36 - 70
01 03
Green Yellow
162
71 - 120 121 - 999
05
Orange Red
09