Be Cool BCBLWiFi01 Instrucciones De Uso página 159

Assembling the fan
First place the main body on the foam as shown.
Remove the plastic wrappings from the parts.
Step 1: Installing the air outlet ring
Install the air outlet ring on the main body of the fan.
Insert the fan air outlet ring screw into the hole at the
bottom of the air outlet ring.
Use the spanner to tighten the air outlet ring screw
clockwise.
Step 2: Installing the column
Insert the aluminium support of the fan into the bottom
of the main body of the fan.
Turn the aluminium support clockwise until it is securely
attached to the lower part of the main body.
Step 3: Installing the base
Install the aluminium support on the fan base as shown
in the illustration. Make sure that the connecting part on
the base is aligned with the groove inside the aluminium
support.
Insert the fan base bolt into the hole at the bottom of the
base.
Tighten the base bolt clockwise with the spanner.
159