Nexx X-COM 3 Guia Del Usuario página 39

11.2.4 VOX Intercom (Default: Disable)
If this feature is enabled, you can initiate an intercom conversation with the
last connected intercom friend by voice. When you want to start intercom, say
a word such as "Hello" loudly or blow air into the microphone. If you start an
intercom conversation by voice, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds. However, if you
manually start an intercom conversation by tapping the Center Button, you
have to terminate the intercom conversation manually. However, if you start
the intercom by voice and end it manually by tapping the Center Button, you
will not be able to start intercom by voice temporarily. In this case, you have
to tap the Center Button to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After rebooting the
headset, you can start intercom by voice again.
11.2.5 VOX Sensitivity (Default: 3)
Vox Sensitivity can adjust the sensitivity of Vox Phone and Vox Intercom.
Level 5 is the highest sensitivity setting and level 1 is the lowest.
11.2.6 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to
HD quality. HD Intercom will become temporarily disabled when you enter
into a multi-way intercom. If this feature is disabled, the two-way intercom
audio will change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
• HD Intercom is active only when Audio Multitasking is disabled.
11.2.7 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations. If this feature is enabled, incoming phone
calls will interrupt intercom conversations. Three-Way Conference Phone
Call with Intercom Participant will not be available if HD Voice is enabled.
Note:
• Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
• HD Voice is active only when Audio Multitasking is disabled.
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM
39