Nexx X-COM 3 Guia Del Usuario página 41

Note:
• Audio Multitasking will be activated during two-way intercom
conversations with a headset that also supports this feature.
• When Audio Multitasking is disabled, the background audio source
will return to its independent volume level.
• For Audio Multitasking to work properly, you need to power the
headset off and on. Please restart the headset.
• Some GPS devices may not support this feature.
11.2.10 Background Volume (Default: Level 5)
The Background Volume can be adjustable only when the Audio
Multitasking turns on. Level 9 is the highest volume and level 0 is the
lowest.
11.2.11 Sidetone (Default: Disable)
Sidetone is audible feedback from your voice and helps you naturally speak
at the correct level based on the noise conditions of your surroundings. If
this feature is enabled, you can hear what you are saying during an intercom
conversation or a phone call.
11.2.12 Voice Prompt (Default: Enable)
While some Voice Prompts may be disabled in the software configuration
settings, the following voice prompts are always on:
- Battery level indicator
- Speed dial
- FM radio functions
11.2.13 RDS AF Setting (Default: Disable)
A radio station with more than one frequency can be used by enabling
the Radio Data System (RDS) Alternative Frequency (AF) Setting. This
setting allows a receiver to re-tune to the second frequency location when
the first signal becomes too weak.
11.2.14 FM Station Guide (Default: Enable)
When FM Station Guide is enabled, FM station frequencies are given by
voice prompts as you select preset stations.
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM
41