ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Drilling capacities
Masonry
Steel
Wood
Fastening capacities
Wood screw
Machine screw
No load speed (RPM)
High (2)
Low (1)
Blows per minute
High (2)
Low (1)
Overall length
Rated voltage
Net weight
without notice.
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
Intended use
The tool is intended for impact drilling in brick, brickwork
and masonry. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (L
) : 81 dB (A)
pA
Sound power level (L
) : 92 dB (A)
WA
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
DHP489
16 mm
13 mm
Auger bit: 38 mm
Self-feed bit: 51 mm
Hole saw: 51 mm
10 mm x 90 mm
M6
0 - 1,800 min
0 - 550 min
0 - 27,000 min
0 - 8,250 min
175 mm
D.C. 18 V
1.8 - 2.5 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
5 ENGLISH
-1
-1
-1
-1
-