Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Remove the middle hinge. Remove the bottom door and place it on a soft surface to avoid
scratching.
4.
Move the cover plates from one side to the other.
5.
Remove the bottom hinge and adjustable foot.
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 24 hours before turning it back on.
6.
Reattach the pin in the hinge so the pin is pointing upwards when the hinge is turned.
40
DO1053TDK
Publicidad
