Publicidad
When using this electrical equipment, basic safety precautions
should alWays be folloWed including the folloWing:
BURN HAZARD
To avoid risk of burns:
• Bottle Warmer components and water
temperature can be very hot. Avoid direct
contact with water and steam. Handle
with care.
• Do not touch surfaces that may be hot.
Wait until all parts of the unit have
cooled before touching them.
• Bottles and food jars will be hot; remove
with care.
• Before serving be sure food is at a safe
temperature.
• To avoid direct contact with hot water,
use Support Tray when warming food
containers or small bottles.
• Do NOT move Bottle Warmer when in use
or when contents are still hot.
CAUTION
• NEVER use without water.
• Always measure water amount in a
separate container, and pour directly into
Bottle Warmer.
• This is NOT a toy. Keep out of reach of
children.
• Adult supervision required.
• Close supervision is necessary when any
appliance is used by or near children.
• For household use ONLY - Do NOT use
outdoors.
• Do NOT use appliance for other than
intended use.
• The use of accessory attachments is not
recommended by Chicco and may cause
injuries or damage.
• Do NOT use with any bottle or food
container that is not intended to be
heated.
All manuals and user guides at all-guides.com
WARNING
CAUTION
• Do not place on or near a hot gas or
electric burner, or in a heated oven.
• Not for space heating purposes.
• Do NOT let cord hang over edge of table
• NEVER use an extension cord.
• Check that the control is in the OFF "O"
• This appliance has a polarized plug (one
intended to fit into a polarized outlet only
• Remove plug from outlet when the
appliance is not in use, before putting on
• Inspect carefully before each use. Do not
malfunctions or is dropped or damaged
• To protect against electrical shock do not
• Do NOT use if the Bottle Warmer, plug, or
becomes submerged.
or counter or touch hot surfaces.
position before plugging cord into wall
outlet. To disconnect, turn the control to
the OFF "O" position, then remove plug
from wall outlet.
blade is wider than the other). To reduce
the risk of electric shock, this plug is
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
or taking off parts, and before cleaning.
Allow to cool before handling.
operate any appliance with a damaged
cord or plug or after the appliance
in any manner. If Bottle Warmer is faulty
and/or not working correctly, switch it off
immediately and unplug it from the wall
outlet.
immerse cord, plugs, or Bottle Warmer in
water or other liquid.
cord accidentally falls into water or
Publicidad
