Descargar Imprimir esta página

Hauck Flash 6 Instrucciones De Montaje Y Uso página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Instructions of use
GB
Delivery contents (Figure1)
1.
Setting the pram up (Figures 2a+2b+2c)
Pull back the push-bar catch beneath the sponge rubber on the clips. This is
how you loosen the catch. The pram can now be opened forwards. Now press
the cross strut down until the horizontal position is reached.
2.
Wheels (Figure 3)
Push the two double wheels onto the wheel steering joint and check that they
have clicked into place.
3.
Front bracket
The front bracket can be released on the underside of the armrests.
4.
Rear wheel brake (Figure 4)
Both rear wheel brakes have to be engaged to park the pram.
5.
Adjusting the front wheels (Figure 5)
When you wish, put the two front wheels in the running direction and then
press the locking device down. The pram now moves straight ahead. To
release the locking device, press it down.
6.
Backrest (Figure 6)
You can adjust the backrest into any position you wish by adjusting the belt
buckle.
7.
Footrest (Figure 7)
The footrest can be pulled out on both levers to extend it.
8.
Fitting the folding top (Figure 8)
To Þ t the folding top, press the clamping device on the folding top on both
sides onto the chassis and let it click into place.
12

Publicidad

loading