Publicidad
appliances with the TesyCloud application will appear on the „Dashboard" of the
EN
application. If data is filled in incorrectly, the list of connected appliances remains
empty.
1.4.
In case you have forgotten your password, please use the „Forgot Password?"
function. At the e-mail address you specified, you will receive a confirmation code
and the opportunity to change your password.
2.
Adding a new Tesy-branded appliance to the MyTESY application.
2.1.
Press the „+" button from the Dashboard.
Read the following list of necessary requirements for the successful connection of
the appliance. Select the "Continue" button.
2.2.
Select the type of appliance you want to add.
Connection of convectors model CN06; CN031; CN051; CN052;
2.3.
On the screen are displayed the instructions for preparing to add the selected
appliance via the control panel commands . Select the „Continue" button.
2.4.
Scans for MyTESY compatible devices. When your device is detected, a
message to connect to a Tesy-CN06 AS device is displayed. To continue the joining
process, you need to confirm with the „Connect" button.
Note: Check that the Wi-Fi network of the convector is switched on,
there is an indication on the screen
Mode for 3 seconds, use the Up / Down
function, then select On and confirm with the Mode button.
2.5.
Choose your local wireless Wi-Fi network and press the „Continue" button.
Note: If your network is not visible in the list of networks, press the
„Scan" button to refresh the list.
2.6.
Enter the password of the selected network and press the „Continue" button.
2.7.
Confirm the connection to the selected network using the Mode button on
the device's control panel.
2.8.
. In the next screen, enter an appliance name and select the device power from
the drop-down list.
Press "Continue".
Note: The power is indicated on the type plate of the appliance. A
message about a successfully added device to your account appears
and after the „End" button the device appears in the main screen of the
application.
Connection of convectors model CN04; CN03;
2.3.
On the screen are displayed the instructions for preparing to add the selected
appliance via the control panel commands .
2.4.
Manually enter the wireless network name of the appliance, or scan the QR
code.
Note: The wireless network name is case sensitive.
Note: The QR code and the wireless network name are marked on a
label next to the rating plate of the appliance
Press the „Continue" button. The app automatically connects to the wireless network
of the appliance.
2.5.
Choose your local wireless Wi-Fi network and press the „Continue" button.
2.6.
Enter the password of the selected network and press the „Continue" button.
2.7.
On the next screen you need to enter:
2.7.1.
The profile registration e-mail address.
2.7.2.
For some models, you can enter an appliance name.
2.7.3.
For models where the network broadcast by the device remains
accessible after joining, you can enter a password to protect it.
Upon successful connection to your local wireless Wi-Fi network and, accordingly,
to the Internet, the Dashboard will open. Your appliance will be added to the list.
Note: If a connection failure message appears on the screen, check
whether the password of your local network is entered correctly or the
quality and/or availability of the Internet service.
Note: To change the name of the added appliance to a name of your
choice, click on the appliance in the list of appliance and in the screen
that opens select the „... " button. In the opened menu, select „Rename
appliance".
From the list of registered devices, select the device you want to control.
A screen opens with controls that allow you to select the mode of operation, to
monitor the current status of the appliance, to make a detailed reference of the
consumed energy.
1.
ON/OFF control
2.
Manual control
3.
Weekly programmer mode
4.
Eco Mode
5.
Comfort Mode
6.
Sleep Mode
32
Operation and Storage Manual of Panel Heater
. To turn on the function, hold
buttons to find the Wi-Fi
DEVICE MANAGEMENT
/QUICK START ��/
7.
Delayed start mode
8.
Keypad lock function
9.
Additional settings
10.
Dashboard
1.
To be able to operate you device, it must be switched on .
2.
Manual mode - The function is active for all models
When selecting the „Manual" mode, you can set the desired temperature in the
heated room by moving the slider left and right. While the screen is warming up,
the heating icon
appears on the screen.When the appliance has reached the
set values, „Ready" appears on the screen.
3.
In program control
, (weekly programmer) - The function is active for all
models
3.1.
Activation of program control is done via the „Activate" button. A message
opens stating that activating this mode will automatically switch off the heating
of the appliance.
3.2.
Adding / Editing the settings of program mode is done by the „Edit" /
„Correction" button. In this menu you have the opportunity to create a work
schedule for each program and change it if necessary.
Add a program for a day of the week:
A new window opens, which allows for:
•
Adaptive start on / off - this function predicts and initiates the optimal start of
heating in order to reach the set temperature at the desired time;
•
Choice of day of the week;
•
Option to copy the current settings for all days of the week;
•
„Add program" - selection of time range and temperature setting.
3.3.
Time range selection and temperature setting:A new window opens, which
allows for:
•
In the field „From" set the start time;
•
In the field „Till" set the end time;
•
Temperature selection using the slider
•
Save the settings with the „Save" button
4.
„Eco" mode - to activate, press
The function is active in models: FinEco CN 06; HeatEco CN 031; LivEco CN 051.
Editing the settings of the „Eco" mode is done using the „Edit" / „Correction" button.
In this menu you have the option to change the default temperature and the time
after the device switches to „Comfort" mode using the sliders. The correction is
confirmed with the „Save" button.Deactivation of the mode is done by the button
„Deactivate" / „Deactivate".
5.
Comfort mode - to activate, press
The function is active in models: FinEco CN 06; HeatEco CN 031; LivEco CN 051.
The settings of the „Comfort" mode are edited via the „Edit" / „Correction" button.
In this menu you have the option to change the default default temperature
using the slider. The correction is confirmed with the „Save" button.Deactivation
of the mode is done by the button „Deactivate" / „Deactivate".
6.
Sleep mode - to activate, press
The function is active in models: FinEco CN 06; HeatEco CN 031; LivEco CN 051.
Editing the settings of the „Sleep" mode is done using the „Edit" / „Correction" button.
In this menu you have the option to change the time after the device switches to
„Comfort" mode using the slider. The temperature in Sleep mode is 3 degrees lower
than the one set in Comfort mode. The correction is confirmed with the „Save"
button.Deactivation of the mode is done by the button „Deactivate" / „Deactivate".
7.
Delayed start mode - The function is active for all models
To activate, press
. A message opens stating that activating this mode
will automatically switch off the mode in which the device is located.
The settings of the "Delayed start" mode are done via the "Edit" /
"Correction" button. In this menu you can set the temperature and time
after the appliance is switched on using the sliders. The correction is
confirmed with the „Save" button.Deactivation of the mode is done by the
button „Deactivate" / „Deactivate".
8.
Keypad lock function - The function is active for all models
You can lock the keys to prevent the settings from being changed using
the key
.
ADDITIONAL SETTINGS
1.
Choose "More"
button to enter additional settings of the chosen appliance.
2.
„Open window" function - to activate / deactivate, press the button
3.
Anti-freeze function - to activate / deactivate, press the button
4.
Air Safe function
- to activate / deactivate, press the button
.
.
.
.
.
.
Publicidad
