Hauck Roadster Duo SL Instrucciones Para El Uso página 19

10. Folding (Figure 10a+10b+11a+11b)
Pull the upper locking lever to the left while simultaneously pressing the
release button (Figures 10a+10b). When the baby stroller is released
push the second locking device forwards and fold the stroller toward the front
(Figure 11a+11b). Secure with the securing device. Make sure the backrest is
in the reclining position.
Securing the front wheel in place (Figure 12)
11.
Lock or unlock by twisting the caster as shown.
MAINTENANCE AND CARE
General
Check the functions of the baby stroller regularly. Check the stability of the
frame, tightness of the screws, function of the locking devices, mount of the
wheels and the function of the brakes. From time to time, check the condition
of the sewn seams of the cushion covers and examine the plastic parts.
Damaged or worn parts should be immediately replaced. This applies to parts
that are broken, torn, faulty or worn out. Only use original hauck replacement
parts. Do not expose your baby stroller to extreme sunlight, as this may cause
fading of the fabric covers and plastic parts.
Cleaning the covers
Remove the cover from the frame by loosening or opening the necessary
straps, snap fasteners or screws. Before washing, read the care instructions
on the attached label.
To gently clean the cover, clean it uniformly with a moist cloth. If the cushion
material cannot be removed from the cover, be careful not to soak the cushion
when cleaning the cover. If there are no plastic, wood or metal parts on the
cover, you can wash the cover in a washing machine at 30° C and spin dry at
medium speed. Hang the cover on a line to dry, but not in the direct blazing
sun. Do not dry the cover in an automatic dryer, as it may shrink. Wait until the
covers are completely dry before putting them back on the cushions and back
in the baby stroller.
Cleaning the frame
Always dry the baby stroller with a soft cloth after using it in the rain or snow.
To clean the frame use mild soapy water or lukewarm water. Dry with a soft
cloth. Plastic parts can be cleaned with commonly available cleaning agents.
Maintenance of the wheels
Clean and apply petroleum jelly or anti-corrosion spray to protect against rust
and build-up of corrosive residues regularly. In winter, remove salt residue
immediately. Remove dirt from the wheels and axles regularly.
GB
19