Publicidad
Idiomas disponibles
Idiomas disponibles
UK
Referring to Fig.1:
ON/OFF LED AND BUTTON
1
2
PROGRAMME SELECTION BUTTON
3
START BUTTON
4
AUTOMATIC START BUTTON
4a WASHING TEMPERATURE DISPLAY
Short washes
Medium wash
Long wash
Referring to Fig.2
Turn on the main power switch and open the external water tap.
Check the presence of the overflow.
Press ON/OFF (1).
When the tub level is reached the STATE LED (6) switches off.
The green dot in the corner of the TEMPERATURE DISPLAY (4a - 4b) indicates that the washing
nor rinsing water is heating..
When the working temperature is reached, the STATE LED (6) stays on, green.
The optimal wash conditions have been reached.
Fig. 3
Referring to
, to ensure the correct operation of the dishwasher follow the rules described below:
Use a suitable rack, fill without overloading and without overlapping the dishes.
Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
Place the empty dishes in the rack facing downwards.
Place plates and the like in the sloping rack, with the inner surface facing upwards.
Place the cutlery in the cutlery basket, handle end down.
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
Use only solid, dishwasher-proof dishes.
Page 6 of 12
INSTRUCTION MANUAL FOR DISHWASHERS
Chap 4 USING THE MACHINE
4b RINSE TEMPERATURE DISPLAY
5 CYCLE LED
6 STATE LED
7 AUTOMATIC START LED (hood only)
Drain cycle
Continuous wash
4.2 Switching the dishwasher on
4.1 Key and symbols
4.3
Filling the rack
Publicidad
