Publicidad
Idiomas disponibles
Idiomas disponibles
10. Activating Your Ceiling Fan Smart Features. (cont.)
9. Specify information about your fan:
-Select "Location" and choose from one of the predefined entries or add your own by selecting
"OTHER". When finished, select "Save".
- Select device name and enter the name for your device. When finished, select "OK" to save.
PLEASE NOTE: The name you inform will be used by voice assistants (such as Google Assistant,
Amazon Alexa, and others) so a simple, easy-to-remember name is optimal.
10. Select "Continue".
11. Select the Wi-Fi network you would like to connect the SBB to.
12. Enter the Wi-Fi password and select "OK".
- If there is an issue with the connection or wrong password is
entered, you will receive an error message. Select "OK, I've Got It".
13. Once the connection is made, select "DONE".
14. If the SBB fan is not displayed in the Bond application, swipe
down to refresh.
For assistance at any time during this process, go to the "Help"
section of the app:
- Tap on "Settings"
- Tap on "Help Center"
- Choose "Open a Ticket" or "Live Chat"
11. Testing Your Fan.
It is recommended that you test fan before finalizing installation.
Restore power from circuit box and wall switch (if applicable).
Test fan speeds with the different fan speed buttons (1 - 6) on
remote control. Test the light ON/OFF function by pressing the
button. Test the dimmer function by pressing the
and holding it down for up to 5 seconds. If the remote control
operates all of the functions of the fan, battery has been installed
correctly. If the remote control does not operate all of the fan
functions, refer to "Troubleshooting" section to solve any issues
before contacting Customer Service.
Fan must be on LOW before setting the fan in reverse. Use
button to recirculate air depending on the season. A ceiling fan
will allow you to raise your thermostat setting in summer and
lower your thermostat setting in winter without feeling a
difference in your comfort.
NOTE: If the remote control interferes with other appliances, or
does not function correctly, turn power off first and then go back
to the LEARN instructions on Section 8, page 9.
IMPORTANT: Remote control must be synchronized with fan in
order to properly function.
button
page 11
SMART CEILING FAN
SETUP VIDEO
Publicidad
