Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
8. Connect the Water Supply Line, (Figure 8)
• Connect the water supply line (not included)
between the tank (A) and shut-off valve.
• Tighten the tank connection coupling nut ¼ turn
beyond hand tight. (DO NOT OVERTIGHTEN
THE TANK CONNECTION.)
• Turn on supply valve and allow tank (A) to fill.
• Check for leakage at all connections and tighten
or correct as needed.
9. Install Seat with Lid (C), (Figure 9)
• Place the seat (C) on the toilet, aligning the holes
of the seat with the holes in the back of the toilet
bowl (B).
• Insert the lock-bolt (MM) through the holes. Place
the toilet seat washer (NN) on the lock-bolt (MM)
from underneath the toilet bowl (B).
• Secure the lock-bolt (MM) with the lock-nut (OO)
from underneath the toilet bowl (B), with the
lock-nut's tapered end on top, using a flathead
screwdriver to tighten the lock-bolt (MM).
CAUTION: DO NOT OVERTIGHTEN THE
LOCK-BOLT (MM), AS IT MAY DAMAGE THE
SEAT (C).
• Push the decorative cap down.
Exclusively Distributed By:
HD Supply Facilities Maintenance, Ltd.
Atlanta, GA 30339
© 2022
Made in China
Figure 8
Figure 9
MM
NN
OO
To Reorder:
1-800-431-3000
hdsupplysolutions.com
6
Publicidad
