10.9
Emptying the collection bag
Empty the collection bag (9), when it is approx. Half full. This way the suction capacity is
maintained efficiently.
▪
Switch the appliance off and remove the battery (13).
▪
Open the zipper at the base of the collection bag and empty it.
▪
Reclose the sipper completely.
11 CLEANING AND MAINTENANCE
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
▪
In order to maintain battery capacity, we recommend the battery to be completely
discharged every one month and fully recharged again . Store in a dry and frost-free
place, the ambient temperature should not exceed 40 °C.
12 TECHNICAL DETAILS
Rotation speed
Rated voltage
Max air speed
Max suction capacity
Battery connection
Soft grip
Capacity of collection bag (l)
Shredding ratio
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2024 VARO
POWDPG75270
8 000-14 000 min-1
40 V
210 km/h
9.5 m³/min
Slide-on
Yes
45
15:1
94 dB(A)
106 dB(A)
3,4 m/s²
P a g e
| 11
K = 1.5 m/s²
www.varo.com
EN