Goodyear GY 702TL Manual De Instrucciones página 34

English
Owner´s manual
•
5) When mounting a new spark plug, you should screw ½ more thread with the wrench after the washer is
compressed. If you are using the plug you already had, you will only need to do a ½ to ¼ turn for the plug
to seat.
CAUTION: The spark plug must be securely tightened. An improperly tightened plug can become very
hot and possibly damage the engine. Never use a spark plug with an improper heat range.
7. CLUTCH CABLE ADJUSTMENT
Measure the free play at the lever tip.
Free play: 3-8 mm (0.1-0.3 inch)
If the free play is incorrect, loosen the lock nut (1) and
turn the adjusting bolt (2) near or far as you need.
After adjustment, tighten the lock nut securely. Then
start the engine and check for proper clutch lever
operation.
8. THROTTLE CABLE ADJUSTMENT
Measure the free play at the lever tip. Free play:
5-10 mm (0.2-0.4 in).
If the free play is incorrect, loosen the lock nut and
turn the adjusting nut near or far as you need.
9. BELT TENSION ADJUSTMENT
Adjust the clutch lever free play.
The standard belt tension is 60-65 mm (2.4-2.5 inch) at the belt pulley with the clutch engaged (clutch
lever is squeezed). To adjust, loosen the four engine mounting bolts and the engine stay tightening bolt,
and move the engine forward or reverse to arrive proper tension of the belt.
CAUTION: After adjusting the tension, make sure
that the outside face of the drive pulley is flush by
using a straight gauge.
34
1 2
Throttle lever
Adjusting
nut
Lock nut