Goodyear GY 702TL Manual De Instrucciones página 35

English
Owner´s manual
•
OBSERVATION
Please dispose of used oil in a way that does not harm the environment. We suggest that you take it in a closed container to
your green point for recycling. Do not throw it in the trash or pour it down the drain or on the ground.
(1) Engine mounting bolts
(2) Engine stay tightening bolt
Loosen the screws that hold the belt. Adjust the clearance between the belt brake and the belt as illustrated
in the picture with the clutch lever depressed.
10. TRANSPORTING / STORAGE
WARNING:
When transporting the tiller, turn the fuel valve OFF and keep the tiller level to prevent fuel spillage. Fuel
vapor or spilled fuel may be ignited. Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.
WARNING: Gasoline is highly flammable and explosive under certain conditions. Do not smoke or allow flames or sparks in
the area.
a. With the fuel valve turned OFF, remove and empty the fuel strainer cup.
b. Turn the fuel valve ON and drain the gasoline in the fuel tank into a suitable container.
c. Replace the fuel strainer cup and tighten securely.
d. Drain the carburetor by loosening the drain bolt. Drain the gasoline into a suitable container.
3. Pull the starter grip until resistance is felt. Continue
pulling until the notch on the starter puller aligns
with the hole on the recoil starter. At this point, the
intake and exhaust valves are closed and this will
help to protect the engine from internal corrosion.
Belt blockers
(1) Align the notch on the
pulley knob with the hole in
the top of the starter coil.
35