Publicidad
Idiomas disponibles
Idiomas disponibles
Clean the equipment regularly with a moist cloth and
some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool
increases the risk of an electric shock.
Maintenance
There are no parts inside the equipment which
require additional maintenance.
9. STORING AND TRANSPORT
Storage
Store the device in a dry and dustproof location and
out of reach of children.
Remove the rechargeable battery from the device
before storing the device.
The optimum storage temperature for the battery
and device is between 40°F/4°C and
104°F/40°C.Avoid extreme cold or heat during
storage,so that the battery does not lose
performance.
For storage, it is suggested to recharge the battery
between 50% and 75% charge.Charge the device
at least once in 3-6 months to preserve battery life
span.
Transport
Secure the appliance against slipping.
If shipping, use the original packaging wherever
possible.
10. TROUBLE SHOOTING
Although your new angle grinder is really very simple to
operate, if you do experience problems, please check
the following:
1. If your grinder wheel wobbles or vibrates, check that
outer flange is tight; check that the wheel is correctly
located on the flange plate.
2. If there is any evidence that the wheel is damaged do
not use as the damaged wheel may disintegrate,
remove it and replace with a new wheel. Dispose of
old wheels sensibly.
3. If working on aluminum or a similar soft alloy, the
wheel will soon become clogged and will not grind
effectively.
GB
11. Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means:
Batteries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environment
and human health.
Consumers must dispose of waste electrical
devices, spent portable batteries and
rechargeable batteries separately from
household waste at an official collection point
to ensure that these items are processed
correctly. Information on returning these items
is available from the seller. Sellers are required
to accept these items free of charge. Batteries
and rechargeable batteries, which are not
permanently installed in waste electrical
devices, must be removed prior to disposal
and must be disposed of separately. Lithium
batteries and battery packs in all systems must
only be retuned to a collection point when
discharged. Batteries must always be
protected against short circuits by covering the
poles with adhesive tape.
All end users are responsible for deleting any
personal data stored on waste devices prior to
their disposal.
Disposal of an exhausted battery pack
To preserve natural resources, please recycle
or dispose of the battery pack properly. This
Li-ion
battery pack contains Li-ion batteries. Consult
your local waste authority for information
regarding available recycling and/or disposal
options. Discharge your battery pack by
operating your tool, then remove the battery
pack from the tool housing and cover the
battery pack connections with heavy-duty
adhesive tape to prevent short circuit and
energy discharge. Do not attempt to open or
remove any of the components.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can be
recycled. Make these materials available for
recycling.
15
Publicidad
