Panasonic CQ-R255SEUC Manual De Instrucciones página 26

Installation Guide
continued
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt
(D,
using a suitable wrench.
c)
Insert the Power Connector
(D
to the unit.
d) Insert the unit into Mounting Collar© and push it in until "click" is heard.
e) Secure the rear of the unit to the car by either of the two recommended methods as follows.
■ Using the Rear Support Strap (
3
)
Affix one end of the Rear Support Strap
(D
to the rear of the unit, and the other end to the Fire Wall of Car,
or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt
(D
on the rear of the unit with Rubber Cushion (Optional), and mount it into the exist¬
ing Rear Support Bracket.
Fire Wall of Car
3. After installation reconnect the negative (-) battery terminal.