ADE CK 1702 Instrucciones De Operación página 19

1 Symbol for radio reception for time signal transmitter DCF77
2 Symbol for active alarm function
3 Current moon phase
4 Date and week day acronym
5 Indoor temperature in °C or °F
6 Time
7 Hanging loop
Operating buttons:
‚ SET: activates setting mode, saves settings
‚ ALARM: activates/deactivates alarm function
8 ‚ UP: increases values
‚ DOWN: reduces values
‚ WAVE: Manually starting signal reception to the time signal transmitter
‚ SNOOZE: interrupts the alarm for 5 minutes
9 Battery compartment
10 Fold out support foot
Start-up
For use, you will need two LR6 (AA), 1.5V batteries.
1. Push in a bit the closing flap and remove the lid of the battery compartment.
2. Insert 2 batteries of the type LR6 (AA)/1.5 V as depicted on the bottom of the
battery compartment. Pay attention to the correct polarity (+/-).
3. Replace the lid of the battery compartment and fold it down. The closing flap must
engage audibly.
Once the batteries are inserted, the clock switches to the receiving mode, see next
chapter.
Notes on changing the battery:
‚ Only use the type of battery that is specified in the "Technical Data".
‚ Always exchange all of the batteries at the same time.
‚ Dispose of batteries in an environmentally appropriate way
(see "Disposal").
DCF Radio-controlled clock CK 1702 | CK 2307-x
Start-up
19