HTW -VTR-40CK Manual De Usuario página 11

Tower fan HTW-VTR-40CK
1. Turning ON/OFF
· Press power button to turn on fan to speed 01.
· Press power again to turn off fan into standby mode.
2. Adjusting Wind Speed
When on, press wind speed button to cycle through 01-12 speeds. After 12, cycles to 01.
3. Oscillation
When on, press oscillation button to start 90 degree back/forth oscillation. Press again to stop
oscillation.
4. Timer
· When on, press timer button to cycle through 1H-8H timer.
· After 8H, cycles to 0H which turns timer off.
FUNCTIONS OF REMOTE CONTROL
POWER
In standby mode, press the
"Power" button to turn on the fan.
Press again to turn off the fan.
WIND SPEED
When the device is turned on,
press the "+" button to increase
the speed and "-" to decrease.
When it reaches the twelfth
speed setting, press the "+"
button again to cycle to the
00-speed setting.
STRONG MODE
When the device is turned on,
Press the "Strong Mode"
button to run the strong wind
mode, which it is the twelfth
speed setting.
SLEEP MODE
When the device is turned on,
press the"Sleep Mode" button
to enter into sleep mode, which
it is the fourth speed setting.
TIMER
When the device is turned on,
press the "Timer" button, it will be
set to work for 1-8 hours, which
the screen displays 1H, 2H......8H,
from 8H press the button again to
cycle to 0H. Timer setting display
will change to Wind speed setting
display after the screen flashes
for 3 seconds due inactivity.
DESCRIPTION OF PARTS AND FUNCTIONS
CHILD SAFETY LOCK
When the device is turned
on, press the "Child safety
lock" button to lock the
panel button and remote
control. Press the child
safety lock" button and
hold until beep to release
the lock.
COMFORT MODE
When the device is turned
on, press the "Comfort
Mode" button to run the
natural wind mode, which
it is the ten speed setting.
DISPLAY OFF
When the device is turned
on,
Off" button to turn off the
display screen. After the
screen fades out, you can
press any function button to
restore the display.
NATURAL MODE
When the device is turned
on, press the "Natural Mode"
button to run the natural wind
mode, which it is the eighth
speed setting.
OSCILATION
When the device is turned on,
press the "Oscillation" button to
enable the oscillation function.
Press again to disable the
oscillation function.
USER MANUAL
press the "Display
11
