Descargar Imprimir esta página

Cook'in garden EL004T Guía De Uso Y Mantenimiento página 10

Barbacoas, mesas & accesorios

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
The device must be
correctly
installed
according
to
assembly
enclosed leaflet.
A/ Before cooking
IMPORTANT:
WHEN THE APPLIANCE IS
NOT IN USE, ALWAYS
UNPLUG THE POWER
CORD
FROM
ELECTRICITY
BEFORE
FITTING
REMOVING
ATTACHMENTS
BEFORE CLEANING THE
APPLIANCE.
N.B: Before the first use
of the appliance, it's
recommended to clean
it and to make it running
idle: Clean the cooking
plate with a wet rag or
sponge, and then dry it.
Plug the appliance and
put it on during 10
minutes.
During the first uses,
appliance can release
some
smoke
odor;
it's normal and it will not
affect
appliance
functioning.
After 10 minutes, unplug
the appliance and let it
the
cool down.
manual
When the appliance is
cold, clean the cooking
plate.
-Before use, wash the
EVEN
hotplate and the grease
tray with hot water and
a mild detergent. Dry
them thoroughly.
THE
To make cleaning easier,
MAINS
cover the grease tray
OR
with tin foil to collect
SINGLE
any fats and juices.
OR
Plug the power cord into
an
socket.
Turn
knob so that the desired
temperature is aligned
with the button of the
reference
light comes on and stays
on
appliance
operation.
The higher the selected
temperature, the higher
the
and/or
required.
B/ Cooking
Using a rubber spatula
or kitchen tongs, place
the food you want to
cook on the hotplate.
earthed
power
the
thermostat
point.
The
as
long
as
the
is
preheating
time
IMPORTANT: Do not use
sharp or metal objects
which will damage the
surface of the hotplate.
IMPORTANT:
using, wear oven mitts
to prevent risk of burns.
C/
Extinguishing
appliance
Once you have finished
cooking,
thermostat
position "0" and unplug
the power cord from the
outlet.
D/
Cleaning
maintenance
Wait until the barbecue
is completely cold.
For hygiene and safety
reasons: carefully clean
your appliance and all its
accessories
the grease drawer) after
in
each use, using hot
soapy water and a soft
non-abrasive cloth, in
order to remove grease
residue and using a soft
non-abrasive cloth. Dry
and
oil
surfaces.
While
the
turn
the
knob
to
and
(including
cast
iron

Publicidad

loading