Publicidad
Idiomas disponibles
Idiomas disponibles
- Before each use, check that the system is properly locked (the spring-loaded click must lock).If any parts are damaged,
broken, worn or missing, contact the dealer.
ASSEMBLY AND USE
The products are delivered half-assembled and can be fitted without tools.
Step 1
•
Attach the backrest tube to the frame by pressing the push buttons and sliding the backrest tubes into the tubes
under the seat.
Step 2
•
Attach the feet to the frame by pushing the push-buttons into the tubes on either side of the feet.
•
Make sure that the push-buttons engage correctly in the holes and that they are stable and set in the same way.
Step 3
•
You can sit down on the seat and start showering.
Note: the armrests and seat can be folded up.
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Wipe the product dry after each use.
•
Periodically clean the product with a damp cloth and a mild detergent or disinfectant. For example, a mild chloride-
based disinfectant can be used.
•
If the locking mechanism does not seem positive or if there is excessive movement in the appliance, remove it from
service and contact your dealer.
•
Check the product for cracks and damage, particularly to the backrest and seat.
•
Do not use in environments above 60ºC (saunas, for example).
•
If there is a malfunction, do not repair the product yourself. Consult an authorized dealer.
• Checklist :
To keep the product in good condition, check before each use, and check regularly as follows:
Version Juin 2023
6
Publicidad
