Publicidad
Idiomas disponibles
Idiomas disponibles
SFA 7600
Fan function:
Presione el botón "ON/OFF" para encender el ventilador.
Establezca la velocidad del aire mediante el selector de velocidad para seleccionar entre baja,
media y alta presionando el selector varias veces.
Presione el botón "ON/OFF" para apagar el ventilador.
Manual head lifting:
Firmly hold the fan stem and carefully push the head back until you hear a "click" indicating
adjustment to the position. There are 3 tilt positions from the fan's straight position to the
rear.
Humidifier use:
At the front of the fan trunk there is a humidification level selector dial. Turn clockwise from
the ON/OFF position to start the humidification function and select the level. Return to the
initial ON/OFF position to turn off this function.
Timer function:
You can control the operating time of the device.
To program the run time simply select it using the Timer Settings button.
You can select between 0.5 and 7.5 hours by repeatedly pressing the timer function, as the
hours accumulate as you press.
After the selected time the device will turn off automatically.
Swing function::
The oscillation function allows you to direct the air flow of the appliance to alternate
automatically.
To activate this function, press the Oscillation Function button and an icon will appear at the
top right of the control panel indicating that this function is activated.
To deactivate this function, press the Oscillation Function button again.
Modes:
Press the Mode Selector button to set the wind mode (Normal, Nature and Sleep).
Normal mode is set by default when the unit is first turned on.
Nature mode creates variable wind patterns to simulate the variable winds you would
experience outdoors.
Sleep mode creates wind patterns that are the same as the Natural mode wind patterns.
However, when the fan is set to medium or high speed, the pattern will drop one speed level
after approximately 30 minutes.
CLEANING AND MAINTENANCE:
Always unplug the fan before cleaning.
Clean all parts with a soft cloth.
Do not allow water or steam to drip.
Do not use corrosive detergents or solvent cleaning.
If there is too much dust or dirt on the rear grille of the fan, it will affect the performance, so
we suggest cleaning the fan at least once a month.
Clean the water tank and humidifier base once every 72 hours to prevent scale, algae, or
bacteria from forming.
Clean with neutral detergents and clean water. Remove any scale or deposits that have formed
on the sides of the tank or interior surfaces and dry all surfaces. Once it's clean, put it back
into place. To avoid damaging plastics, do not use chemicals or abrasive cleaning agents.
18
Publicidad
