Kesser K-GHP-22 Manual De Instrucciones página 18

and understand the resulting dangers. Children are not allowed to play with the
device. Cleaning and maintenance work must not be carried out by children without
supervision.
• CAUTION: Some parts of this product may get very hot and cause burns. Special care
should be taken if children and vulnerable persons are present.
Installation instructions
- Before installation, make sure that all parts are complete and the product is intact.
- If you want to use the electric heater freestanding, please mount it with the supplied feet
and follow the instructions below. Make sure the device is mounted on a flat, stable and
clean surface.
Freestanding installation
1. Place the device on a soft cotton cloth or carpet with the top facing down.
2. Attach the feet to the base of the heater with the supplied screws. Align the holes in the
base with the holes in the feet, insert the screws through the holes and tighten them with a
screwdriver.
Wall mounted installation
4 hook type bracket
1. Take 4 brackets, 6 expansion screws and 6 screws out of the box and attach 2 brackets to
the wall according to the distances between the holes of the bracket as shown in the figure
below.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
18
www.eshopping.de