Kesser K-GHP-22 Manual De Instrucciones página 25

25
Planning your heating
You can program your heater by creating a schedule with "events" when the heating turns on
or off. These events can be time-limited, such as setting a timer, or they can be repetitive so
that the heating is turned on at the same time every week. You can set an unlimited number
of events where the heating is turned on and off throughout the week.
You must set a start time for each event. Then choose whether to repeat the event. Select
"Only once" if you only want to set a timer for the moment. To repeat the event, select the
days on which you want it to occur. Finally, choose whether to turn the heating on or off.
Confirm your settings at each stage and press Save to save the event.
Each event appears in your schedule. You can enable and disable events using the toggle
switch. You can also delete events by swiping left and tapping Delete.
The heater emits a beep when it starts a new heating process. The heater heats in the mode
it was last set to: you cannot schedule mode changes. If you change the setting of the
heater during an event, that is, turn it on when it should be turned off, the heater will remain
in that setting until the next scheduled event.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany