Kesser K-GHP-22 Manual De Instrucciones página 19

19
2. Attach 2 brackets to the bottom of the product as shown in the screenshot below.
3. Hold the device on the side, pay attention to the position of the wall opening in the rear
cover and slide the wall upwards into the slot.
Note: Before drilling, make sure there are no cables or other piping on the wall to avoid
damage. Remember that the screws on the wall must be firm and secure to ensure the safe
installation of the electric heater on the wall. Please note the safety distance given below.
During installation, the heater must be placed at a sufficient distance from flammable
materials and gas, as well as water.
In the case of hanging mounting, the mounting height above the ground must be more than
15 cm. In the case of hanging heaters, the distance to the ceiling must not be less than 50
cm.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany