Makita GCV09 Manual De Instrucciones página 17

Cleaning the brushroll
1. Remove the bottom plate, and then remove the
brushroll.
If the hair of the brushroll gets short, ask the Makita
service center for new one.
Operating the appliance with the short hair brushroll
results in poor dust collecting.
1
2
Fig.37
► 1. Bottom plate 2. Brushroll
2. Remove threads and hairs from the brushroll
using scissors.
Remove the cap and clean debris.
1
Fig.38
► 1. Cap
3. Install the cap, brushroll, and bottom plate in
reverse order.
Fig.39
CAUTION:
Place the bottom plate back in the
position securely until the two lock levers click in
place. If the appliance is operated without the bottom
plate, the brushroll may come off, resulting in injury.
1
Fig.40
► 1. Bottom plate 2. Lock lever
NOTICE:
Always attach the brushroll. Operating
the appliance without the brushroll results in poor
dust collecting.
17 ENGLISH
2