[] Supplied Accessories
owner's manual
remote control
batteries
(1EMN22419A) /_
_
(NF604UD)
(AAx2)
• If you need to replace these accessories,
please refer to the part No. with the illustrations
and call our toll free
customer
support
line found
on the cover of this manual.
• Depending
on your antenna
system, you may need different
types of combiners
(mixers) or separators
(splitters).
Contact your local electronics
store for these items.
Phillips pan screw for
attaching
the stand
x 2
(FPH34140)
[]Attaching
the
Stand
You must attach the stand to the unit to display upright.
Be sure the front and rear of the stand match the proper direction,
Turnthemainunitoverandplace
2
Insert the stand all the way to the
3
Drive Phillips pan screws in the 2
it onto a table which has a soft
main unit slowly,
threaded
holes with a screwdriver
cloth draped
over it. Make sure
Make sure not to put the AC cord
tightly.
not to damage
the screen,
between
the stand and the unit.
Note:
• When attaching
the stand, ensure that all screws are tightly
fastened.
If the stand is not properly
attached,
it could cause the unit to fall,
resulting
in injuries as well as damage
to the unit.
• Make sure to use a table which con support
the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location.
[] Symbols
Used in this Manual
The following
is the description
for the symbols used
in this manual, Description
refers to:
: Digital TV operation
:_
: Analog TV operation
• If neither
symbol
appears under the function
heading,
operation
is applicable
to both,
[] Trademark
Information
• Manufactured
under license from Dolby Laboratories.
"Dolby"and
the double-D
symbol are trademarks
of
Dolby Laboratories.
• Product that have earned ENERGY STAR® are designed
to protect the environment
through
superior energy
efficiency.
[]Tilt
Stand
You can adjust the stand to change the angle
of the TV (-3 ° to 8°).
EN