Chal-tec Boe Manual Del Usuario página 32

EN
32
SAFETY INSTRUCTIONS
Note: Read the manual carefully before installation, as incorrect installation
can be dangerous.
• The rigid parts and plastic parts of the child car seat must be arranged and
installed in such a way that they cannot be pinched by a moving seat or
door of the vehicle during daily use of the vehicle.
• The child car seat must not be used in seating positions where an active
frontal airbag is installed.
• The belts securing the child car seat to the vehicle should be tight.
• The belts securing the child should be adjusted to the child's body.
• The belts should not be twisted.
• Make sure that a lap belt worn low down is properly fitted so that the
pelvis is tightly enclosed and that the lap belts are loaded.
• The child car seat should be replaced if it has been subjected to severe
stress in an accident.
• Any modifications or additions to the child car seat without the approval
of the type approval authority are dangerous.
• There is danger if the installation instructions provided by the child car
seat manufacturer are not followed carefully.
• If the child car seat does not have a textile cover, it should be protected
from sunlight, otherwise it may become too hot for the child's skin.
• Do not leave children unattended in the child car seat.
• Luggage or other objects that could cause injury in the event of a collision
must be properly secured.
• The child car seat must not be used without the cover.
• The child car seat cover may only be replaced with the cover
recommended by the manufacturer, as it is an essential part of the
restraint function.