Chal-tec Boe Manual Del Usuario página 42

EN
42
2. Thread the belt clamp through the hole in the reclining board and rotate
the reclining board (a) from front to back (b).
Note: The reclining board cannot be rotated backward when the car
seat is in position 4.
3. Place the child car seat on the vehicle seat and make sure that it is facing
the direction of travel of the vehicle. The backrest of the child car seat can
be adjusted to three positions (middle picture).
Note: Make sure that the back of the child car seat is tight against the
backrest of the vehicle seat.