Publicidad
Idiomas disponibles
Idiomas disponibles
B
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1. Switch on the appliance.
2. Within 60 seconds after step 1, press the Program button more than 5 seconds, and
then press the Delay button to enter the set model, the rinse aid indication blinks as 1Hz
frequency.
3. Press the Program button to select the proper set according to your using habits, the sets
will change in the following sequence:
D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the power button to exit the set model, the set
success.
D1, Rapid light lit
D2, 90min light lit
D3, 90min light lit, Rapid light lit
Using the appliance
Rinse aid level
31
D4, Glass light lit
D5, Glass light lit, Rapid light lit
EN
Publicidad
