Descargar Imprimir esta página

HIGHONE 10S49 E W929C Instrucciones De Uso página 36

Publicidad

Idiomas disponibles

Idiomas disponibles

B
NOTE
ECO (*EN60436) : The ECO program is suitable to clean
normally soiled tableware, that for this use, it is the most
efficient program in terms of its combined energy and water
consumption, and it is used to assess compliance with the
EU ecodesign legislation.
Saving energy
1. Pre-rinsing of tableware items leads to increased water and energy consumption and is
not recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and water
in the use phase than hand dishwashing when the household dishwasher is used according
to the instructions.
Starting a program
1. Draw out the lower and upper basket, load the dishes and push them back. It is
commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page "Product fiche". Make
sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the
dishwasher will start its cycle.
Using the appliance
35
EN

Publicidad

loading

Productos relacionados para HIGHONE 10S49 E W929C

Este manual también es adecuado para:

982810