Qilive Q.6705 Manual De Instrucciones página 13

4.4. DOOR REVERSAL (OPTIONAL)
1. Make sure that your refrigerator is unplugged.
2. Remove the hinge cover and upper
hinge from the top right side of the
cabinet. Remove the screw hole cover
from the top left side of the cabinet.
3. Remove the refrigerator compartment
door from the cabinet.
4. Remove the screws that secure the
lower hinge on the right side of the
cabinet, then remove the hinge. Remove
the adjustable foot on the left.
5. Remove the adjustable foot on the lower
hinge shaft, and remove the washer and
nut.
6. Turn the lower hinge by 180°.
7. Install the washer and nut into the hole
on the pin shaft, and then install the
adjustable foot.
Hole cover
Adjustable foot
Pin shaft
Washer
Nut
Adjustable foot
13
EN
Hinge cover
Screws
Upper hinge
Lower hinge
Screws
Pin shaft
Washer
Nut
Adjustable foot