Installation
EN
1.
This washing machine is for indoor use only.
2.
This washing machine is not designed for use as a built-in
appliance.
3.
The openings must not be obstructed by carpet.
4.
The washing machine must not be installed in bathrooms or
very wet rooms or rooms containing explosive or caustic gases.
5.
Models with a single inlet valve should be connected to the
cold water supply. Models with double inlet valves should be
correctly connected to the hot water and cold water supply.
6.
The mains plug must be accessible after installation.
7.
To prevent damage to the product, remove all packaging and
transport bolts before use.
8.
This product is for home use only and is only designed for
washing machine-washable textiles.
9.
This appliance is intended to be used in household and similar
applications such as:
staff kitchen areas in shops, offices and other working
-
environments;
farm houses;
-
by clients in hotels, motels and other residential type
-
environments;
bed and breakfast type environments;
-
areas for communal use in blocks of flats.
-
10. Do not climb or sit on top of the machine.
11. Do not lean against the machine door.
12. Handling precautions:
13. Transport bolts must be reinstalled by a technician.
14. Accumulated water must be drained out of the machine.
15. Handle the machine carefully. Never hold any protruding parts
of the machine while lifting. Do not use the machine door as a
handle when moving the appliance.
16. This appliance is heavy. Exercise care during transport.
17. Do not close the door with excessive force. If it is difficult to
close the door, check if the clothes are fully inserted into the drum
and evenly distributed.
18. Do not use the machine to wash carpets.
19. Before washing clothes for the first time, the washing machine
should be run for one full cycle with no clothes inside.
20. Do not place flammable, explosive or toxic solvents into the
machine (e.g. gasoline or alcohol) or use them as detergents. Only
use detergents which are suitable for machine washing.
6