middle hinge
7.
Take out the left upper hinge and hinge cover, and the right-side decorative cover
from the accessory bag.
Install the freezer door onto the middle hinge, then install the left upper hinge,
hinge cover and hole cap. At last, install the right-side decorative cover on the
right side of the freezer door end cap.
left upper hinge cover
left upper hinge
4.4. MOVING THE APPLIANCE
1.
Remove all food from inside the appliance.
2.
Pull the power plug out, insert and fix it into the power plug hook at the rear or on
top of the appliance.
3.
Tape parts such as shelves and the door handle to prevent from falling off while
moving the appliance.
4.
Move the appliance with more than two people carefully. When transporting the
appliance over a long distance, keep the appliance upright.
Precautions before operation:
–
Before making changes, the refrigerator must be disconnected from power.
–
Precautions should be taken to prevent any personal injury.
4.5. STARTING THE APPLIANCE
•
Before initial start, keep the refrigerator still for more than 2 hours before
connecting it to power supply; otherwise it will lead to a decrease in cooling
performance or a damage to the product.
•
Before putting any fresh or frozen foods, the refrigerator shall have run for
2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
•
Connect the power plug into a wall socket to switch on the appliance.
13
cap
hole cap
right decorative cover
EN