Publicidad
Installation and electrical connections must be carried out by qualified personnel only.
Carefully follow all regulations regarding installation and systems that are applicable in the country where
the product is to be installed.
PLEASE NOTE:
l This article must be protected by a differential switch with Dn £ 30mA
l Before any operation (cleaning – changing light bulbs – installing the luminaire) al ways disconnect the power
supply.
l Before installing, check that the position chosen is compliant with requirements for safety distances under the
standards of the country where the product is to be installed.
l The instruction sheet must be kept and made available to personnel entrusted with cleaning/maintenance
operations.
l This article is suitable for indoor use only.
l Connect the appliance to an efficient earth wire
l If the wire and/or some other components are damaged, they must be immediately replaced with spare
parts.
This should be done only by specialized people,to ensure product safety. INDA disclaims any liability for failure to
comply with this obligation.
l The junction box must be built recessed into the wall. It must be made of insulated material and have a lid that
closes completely. It also must have a protection level that is at least equal to that of the device.
l This article can be independently connected to the lighting line and the user socket line, in agreement with the
regulations in force for electrical systems. Doubling the two systems solves the requirement in hotels of enabling
sockets only if explicitly requested by the customer.
l Connect schuko plugs, whith a similar degree of protection class of the instrument.
l Classification under EN 62471 'Exempt Group' for photo biological risks
l This article must be used only if complete with protection screen.
l Connect both the lamp and the power supply wires with a terminal strip E (2 poles 1,5mm min TA 25* IP44) and
place them in the junction box.
Disposal of Waste Electrical and Electronic
Equipment (WEEE) in the European Union.
This symbol appears on the product or on the packaging to indicate that the product must be collected separately.
Users must arrange for the disposal of worn out equipment by taking it to the proper collection centre for recycling
waste electrical and electronic equipment. Separate collection and recycling of worn out equipment during the
disposal process favours the conservation of natural resources and guarantees safe disposal of said equipment
protecting both the environment and human health. For more information on the collection centres for worn out
equipment, contact the sales outlet where the product was purchased.
CLEANING
Quality, technological processes and materials are the features that determine the high standards of our accessories.
However, to avoid surface alterations, it is necessary to follow a few guidelines. Clean all finishes exclusively with soap
and water, and dry with a soft cloth. Do not use coarse cloths, abrasive products, acids, ammonia products, caustic
substances, bleach or solvents.
In case of contact with these substances, rinse surfaces immediately and wipe dry.
Remember that even fumes can damage metal. Wash accessories next to the toilet bowl at regular intervals to avoid
corrosion.
G
8
Publicidad
