Descargar Imprimir esta página

Jackery Explorer 1000 Manual Del Usuario página 6

Ocultar thumbs Ver también para Explorer 1000:

Publicidad

Idiomas disponibles

Idiomas disponibles

US
Fault code
In order to respond to the feedback quickly, we set up common fault codes F0-FE in the
system: If the F8 code appears, please remove the load or unplug the charging plug, the
product can restore by itself, if not, please contact after-sales service; If the F9 code appears,
please remove the load and the product can recover by itself, if not, please contact
after-sales service. In case of any other code appears, please contact our after-sales service.
High-temperature warning
If it appears on the screen, do not worry, the battery will restore automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore after the ambient
temperature is restored.
Quiet Charging Mode
When Quiet Charging Mode is activated, the charging power is reduced, charging speed is
slowed down, and noise during charging is significantly reduced (please enable/disable this
feature in the app).
Battery Saving Mode
When Battery Saving Mode is activated, the available battery capacity of the product
decreases, extending the lifespan of the battery cells (please enable/disable this feature in
the app).
BASIC OPERATIONS
Main Power On/O
Press the "Main Power Button" and the working indicator lights up and the LCD display is illuminated. If
you need to turn off the main power, please press and hold the "Main Power Button" until the working
indicator turns off. The default standby time of this product is 2 hours. (the product will automatically
shut down after 2 hours without charging or discharging) The automatic shutdown time can be set on
the Jackery App.
*In Energy Saving mode, turn on DC output or AC output, or it will automatically shut down after 12
hours if there is no charging input or discharging output.
AC Output On/Off: Ensure that the main power supply is turned on. Press the AC Button, the AC
Output Power indicator lights up. Then you can connect the equipment that needs AC charging. Press
the AC Button again to turn off the AC Output.
DC Output On/Off: Ensure that the main power supply is turned on. Press the DC/USB Button, the DC
Output Power indicator lights up. Then USB/Car Port Output Ports can be connected to external load
devices. Press the DC/USB Button again to turn off the USB/ Car Port Output.
LCD Screen On/Off
To turn on, press the Main Power Button or when there's a charging input, the screen display will light up
automatically. To turn off, press the Main Power Button again and the screen display will turn off.
LCD is off automatically
If there is no operation in 2 minutes, the product will enter a sleep state and the screen display will
automatically turn off.
Turn on/ off the Always-on Display (under charging or discharging state), follow these steps:
After the display screen lights up, double-click the Main Power Button and the Always-on display
mode will be on, then press it again to turn off the screen.
Tip: During Always-On Display mode, the screen automatically turns off after 2 hours without charging
or discharging.
04

Publicidad

loading

Este manual también es adecuado para:

Je-1000d