en-us_main.book.book Page 17 Friday, January 20, 2023 3:02 PM
2
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
3
Connect the wire harnesses
NOTE
• The number of wire harnesses may vary
depending on the model.
4
Place the cover
in its place. Insert and
e
tighten the cover screw
Assembling the Left Refrigerator
Door
• Install the left refrigerator door after the right
1
b
c
2
.
d
3
.
f
NOTE
• The number of wire harnesses may vary
4
CAUTION
door is installed.
Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
clockwise and fasten the hinge.
Connect all the wire harnesses and the
ground wire.
depending on the model.
Push the water supply tube into the hole on
the top case and pull it through the backplate.
INSTALLATION
17
b
c