Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 23 Friday, January 20, 2023 3:02 PM
†
Water Filter
c
Replace the water filter when the Water Filter indicator turns on. After replacing the water filter, press
and hold the Water Filter button for three seconds to turn the indicator light off. Replace the water
filter approximately every six months.
Ice Plus
d
This function increases both ice making and freezing capabilities.
Press the Ice Plus button to illuminate the icon and activate the function for 24 hours. The function
automatically shuts off after 24 hours. Stop the function manually by pressing the button once more.
†
Smart Grid
e
Press the Smart Grid button to turn the function On/Off. When the function is on, the indicator
illuminates. The function automatically turns on when the refrigerator is connected to the Wi-Fi
network. The Smart Grid function is only available if your electric utility company supports the function.
When the refrigerator is responding to a Demand Response (DR) message from the electric company,
the Grid On indicator illuminates.
†
Wi-Fi
f
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The Wi-Fi indicator shows the status of the refrigerator's network connection. The indicator illuminates
when the refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The indicator blinks while the
connection is being made and then turns on once the connection is successfully made.
CAUTION
Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
• To deactivate / activate:
- With either refrigerator door opened, press the Ice Plus button 3 times consecutively while pressing
the Refrigerator button. The control panel beeps and the temperature settings display to confirm that
Display Mode is deactivated. Use the same procedure to activate Display Mode.
NOTE
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
Type B
OPERATION
23
Publicidad
