Assembly
1
Attaching the back to the frame
□
Attach the chair back (B) and chair frame (A) using the four hex bolts (AA) and metal washers (BB).
Tighten the bolts with the hex wrench (DD).
□
Cover with plastic bolt caps (CC).
NOTE: Each bolt should be tightened a few
revolutions at a time, alternating between bolts in a
cross corner (X) pattern to ensure your chair frame is
level.
A
BB
AA
CC
B
6
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM