Publicidad
Assembly (continued)
3
Attaching support
□
Attach the table rim (E) and table top support (D)
using the two hex bolts (AA) and metal washers
(DD). Do not tighten bolts completely.
NOTE: Do not tighten the bolts fully until all parts are
attached on the underside of the table frame.
Attaching the leg connector
4
bracket
□
Attach the leg connector bracket (C) and table leg
(B) using eight hex bolts (CC) and metal washers
(DD). Do not tighten bolts completely.
□
Attach the leg connector bracket (C) and leg
support (A) using four hex bolts (BB) and metal
washers (DD). Tighten with the hex wrench (KK).
□
Cover each bolt with the plastic bolt cap (EE).
NOTE: Each bolt should be tightened a few
revolutions at a time, alternating between bolts in a
cross corner (X) pattern, to ensure your table is level.
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Publicidad
