AquaTru ATU100 Manual Del Propietário página 11

Installation of TruPure Holding Tank Sanitizer
ST EP
5
1. Unscrew the blue cap from the RO holding tank.
2. Wrap the plumber's tape around on the stainless steel threaded stem of the RO holding tank.
3. Screw the TruPure holding tank sanitizer onto the holding tank, hand tighten.
4. Remove the black gasket inside the TruPure holding tank sanitizer. Insert this gasket inside
the holding tank valve.
5. Wrap plumber's tape on the male thread of the TruPure holding tank sanitizer and screw the
RO holding tank valve onto the TruPure sanitizer's threaded stem, hand tighten.
Blue Cap
RO holding tank
RO holding tank
Under Sink / Instructions
Steel Threaded Stem
RO holding tank
RO holding
tank valve
Install RO holding tank valve to the
TruPure holding tank sanitizer
Note: Remove the black gasket that is inside the
TruPure holding tank sanitizer and insert it into the RO
holding tank valve before installing it on the sanitizer.
TruPure holding
tank sanitizer
TruPure holding
tank sanitizer
RO holding tank
(Final assembly)
10