HyperMotion CLIMBER-6FT Manual Del Usuario página 17

Index
1. Introduction
2. Tips for safe use
2.1 Intended Use
3. Symbols
4. list of parts
5. Installation
6. Service and maintenance
7. Utilization
2. Tips for safe use
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN SERIOUS INJURY, PERSONAL
DAMAGE, AS WELL AS WARRANTY LOSS.
The product owner must make sure that all users know and follow these rules to ensure safe use of
the product.
To ensure your safety, please proceed to the installation of this product by carefully following these
instructions. Check the box and all packaging for parts and / or additional instructional materials.
Before starting the assembly, read the instruction manual and identify the parts using the ID and
parts list provided in this document.
Correct and complete installation, use and supervision are essential for proper operation and to
reduce the risk of accident or injury. There is a high risk of serious injury if the product is not properly
assembled, maintained and used.
• It is recommended that the assembly of this product be performed by two adults.
• Be aware that parts can be damaged by over-tightening the screws.
• Wear safety glasses when assembling the product.
• Do not use the device unless it is completely assembled
Most injuries are caused by improper use and / or failure to follow instructions. Be careful when
using this product.
BEFORE YOU BEGIN ASSEMBLY
Bags for components and their contents must be stored separately.
Identify and check all parts and components using the list and identifiers provided in this document.
Check all screws by inserting them into the appropriate holes. Do not peel off the powder coating.
16
EN
side
15
16-18
19
19
19
20-26
27
27